Page 1 of 1

Port-Channel Load Balancing issue between Router & Switch

PostPosted: Fri May 20, 2016 2:07 am
by Arunsundararaj
Dear Team,

We are using port-channel between Switch (4948E) and Router (7606). 4-physical ports are configured in port-channel early, the port-channel traffic was shared all 4-physical ports. No issue came that time. The traffic sharing % is,

Router-Switch Cisco 7606 Gi5/1 52%
Router-Switch Cisco 7606 Gi5/6 47%
Router-Switch Cisco 7606 Gi6/1 43%
Router-Switch Cisco 7606 Gi5/3 48%

And now removed one physical port from port-channel, the port-channel traffic is not properly shared the remaining 3-physical ports and also using port-channel load balancing command (port-channel load-balance src-dst-ip) but still we are facing same issue.

Router-Switch Cisco 7606 Gi5/1 71%
Router-Switch Cisco 7606 Gi5/6 77%
Router-Switch Cisco 7606 Gi6/1 50%

Please give me solution for this problem.

Re: Port-Channel Load Balancing issue between Router & Switc

PostPosted: Sat Feb 03, 2018 3:55 pm
by NorbertM
We've been having the same issue at our company too. Our ports are at an even lower load than that and we're still having issues. What seems to be the problem?