EIGRP and IP-address Helper

For discussions and questions related to Routing guides and labs on routeralley.com.

EIGRP and IP-address Helper

Postby ivan » Mon May 20, 2013 6:39 am

Hi Sir

if i have 3 router , R1,R2,R3 run EIGRP AS 1 and R1 connect with server DHCP and R3 connect with switch and DHCP client . pls advise how configure with IP address helper ?
ivan
 
Posts: 1
Joined: Mon May 20, 2013 6:27 am

Re: EIGRP and IP-address Helper

Postby harvinder » Sun Dec 15, 2013 1:47 pm

Hi...
You need to configure the R3 router inside interface which is connected to switch with IP Helper Address command (DHCP Relay) and complete that command by adding R1 ip address (which is connected b/w R1 & R3).
Now when the R3 inside interface receives the broadcast packet for DHCP server theny by the help of DHCP relay it forward that packet to the R1 where DHCP server is connected as unicast packet.
harvinder
 
Posts: 1
Joined: Sun Dec 15, 2013 1:38 pm


Return to Routing

Who is online

Users browsing this forum: No registered users and 1 guest

cron